Subaru EyeSight User Manual (English)

Other manuals for Subaru EyeSight

Manual19 pages

Owner's Manual124 pages

Quick Guide14 pages

Quick Reference Guide8 pages

Questions and Answers:

B
Brian KingSep 7, 2025
Why is my Subaru Adaptive Cruise Control braking frequently in heavy traffic?
- J
  Jay WellsSep 7, 2025
  When Adaptive Cruise Control is activated, the EyeSight system controls the car based on the movement of vehicles or objects in front. As a result, acceleration and deceleration may be more frequent while the system adjusts to vehicles or objects the camera system is detecting. If maintaining a consistent following distance is difficult under certain conditions (such as in heavy traffic, poor weather, or urban environments), it is advised not to use Adaptive Cruise Control.
F
fgreenSep 6, 2025
Why is not displayed on my Subaru EyeSight Automobile Accessories?
- M
  Melissa RyanSep 6, 2025
  The symbol in your Subaru Automobile Accessories will not be displayed if the requirements for setting cruise control are not met. These requirements include: the brake pedal is depressed, the vehicle speed is over 90 MPH (145 km/h), the combination meter indicates a position other than D (select lever or paddle shift switches are manually operated), the driver’s seatbelt is unfastened, any door is opened (except the rear gate/trunk), the vehicle is on a steep grade, the steering wheel is turned significantly, or the parking brake is released.
B
bishopcalebSep 5, 2025
Why does braking control activate frequently in heavy traffic with my Subaru EyeSight?
- E
  englishmichaelSep 5, 2025
  Unlike a human driver, the EyeSight system in your Subaru Automobile Accessories controls acceleration and deceleration based solely on the actions of vehicles or objects in front. This can lead to more frequent adjustments as the system reacts to detected vehicles or objects. If maintaining a consistent following distance is difficult under certain conditions, such as bad weather or urban environments, consider deactivating Adaptive Cruise Control.
W
whitelindaSep 4, 2025
Why is acceleration slower or faster when the vehicle in front turns or distance increases in my Subaru Automobile Accessories?
- A
  Abigail OliverSep 5, 2025
  If acceleration feels slower or faster when the vehicle in front turns off or the distance increases in your Subaru Automobile Accessories, EyeSight’s reaction time might be affected. Depending on when the detection of the vehicle in front is lost, EyeSight's response may be slower, causing acceleration to feel delayed and braking time to feel longer than normal.
M
margaretwilliamsAug 23, 2025
Why does braking control activate frequently with Adaptive Cruise Control in heavy traffic for Subaru EyeSight?
- D
  Donald RuizAug 23, 2025
  When Adaptive Cruise Control is activated, the EyeSight system controls the vehicle based on the movement of vehicles or objects in front. This can lead to more frequent acceleration and deceleration as the system adjusts. If maintaining a consistent following distance is difficult in heavy traffic, poor weather, or urban environments, consider deactivating Adaptive Cruise Control.
S
Susan AguilarSep 3, 2025
Why is a vehicle not detected, detected late, or detection lost quickly by my Subaru EyeSight?
- B
  Barbara AllenSep 3, 2025
  If, in your Subaru Automobile Accessories, a vehicle in front isn't detected, is detected later, or detection is quickly lost, consider these possibilities: Detection of stopped vehicles or those moving very slowly might be difficult. Also, a dirty or fogged windshield can impede detection, so clean it. The vehicle in front might be too far away, as EyeSight's maximum detection distance is approximately 360 ft (110 m). Additionally, detection range is limited on curves, roads with repeated uphill and downhill grades, or banked roads. Detection may be delayed after the vehicle in front changes, or if water or snow is kicked up by the vehicle in front.
L
Luis HillSep 2, 2025
Why does the Lead Vehicle Start Alert activate with no vehicle in front in my Subaru EyeSight?
- D
  Destiny RossSep 2, 2025
  If the Lead Vehicle Start Alert activates in your Subaru Automobile Accessories even when there's no vehicle in front, it might be responding to other objects appearing in front of your vehicle due to surrounding objects, traffic environment, or weather conditions.
E
ediazSep 1, 2025
Why does the 'brake more' warning timing vary in my Subaru EyeSight Automobile Accessories?
- R
  robinfarleySep 1, 2025
  The “brake more” warning in your Subaru Automobile Accessories activates when the system determines that more braking is necessary, based on factors like the distance from the vehicle in front and the speed difference. The timing of the warning can vary depending on how the brakes are applied relative to the vehicle in front and your speed relative to that vehicle.
P
Pamela TorresAug 31, 2025
Why does my Subaru EyeSight Automobile Accessories make a noise when automatic braking activates?
- B
  bullockglennAug 31, 2025
  The automatic braking control in your Subaru Automobile Accessories has mechanical components that may produce audible sounds during operation. This sound does not necessarily indicate a malfunction.
M
Michael Wilson PhDAug 31, 2025
Why does Lane Keep Assist not operate even though there are lane markers for Subaru EyeSight?
- D
  Donna CastanedaAug 31, 2025
  To operate Lane Keep Assist, the width of the road should be between approximately 10 ft (3 m) and 15 ft (4.5 m).

Subaru EyeSight Specifications

General

Type	Driver Assist Technology
Camera System	Stereo Camera
Additional Functions	Adaptive Cruise Control, Lane Keep Assist
Detection Range	Up to 110 meters
System Activation	Automatic upon vehicle start
Availability	Standard or Optional on most Subaru models