Black plate (488,1)
一般Model "A8190GE-C" EDITED: 2013/ 3/ 29
11-56
Maintenance and servi ce/Replacing battery
5. Remove the old battery.
6. Fit a new battery (type CR-1620 or
equivalent) in the case with its positive (+)
side facing upward.
7. Put the case together by fitting the
mating part of the button side into the hook
on the key side.
After the battery is replaced, the trans-
mitter must be synchronized with the
remote keyless entry system’s control
unit. Press either the “
” or “ ” button
several times to synchronize the unit.
To Next Page
Loading...
