Black plate (487,1)
一般Model "A8190GE-C" EDITED: 2013/ 3/ 29
side facing up ward as s hown in the
illustration. Attach the cover firmly.
& Replacing battery of trans-
mitter
1. Open the key head using a flat-head
screwdriver.
2. Remove the three screws and then
remove the cover.
3. Create a gap between the battery and
the case by pushing the battery gently
with your finger as shown in the illustra-
tion. Then, insert a flat-head screwdriver
that has been wrapped in insulating tape
into the gap.
4. Move the flat-head screwdriver in the
order shown in 1. and 2., and remove the
battery, taking care not to damage the
base panel or terminal.
Maintenance and serv ice/Replacing battery
11-55
– CONTINUED –
11
To Next Page
Loading...
