Subaru Outback 2021 - Page 235

(231,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
12. Select the preferred icon.
13. ? “Set”
NOTE
. An existing user can be overwritten
by selecting a registered number. When
a user is registered by overwriting, the
individual fuel economy data is reset.
. When “User Recognition” is set to
OFF, user registration cannot be se-
lected.
Update Seat and Mirror Position:
1. Touch
(HOME).
2. ?
(Settings)
3. ? “Car”
4. ? “Driver Monitoring System”
5. ? “Update Seat and Mirror Position”
6. ? “Set”
NOTE
. Start the user registration after ad-
justing the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle. If they are adjusted during
user registration, it may be disrupted.
Refer to “Power Seat” FP32 or “Out-
side Mirrors” FP271.
. If the ignition switch is turned to the
“OFF” position before user registration
is complete, the information of the
adjusted seat position, outside mirror
angles, and reverse tilt-down outside
mirror angle will not be saved.
Delete Driver Position:
1. Touch
(HOME).
2. ?
(Settings)
3. ? “Car”
4. ? “Driver Monitoring System”
5. ? “Delete Driver Position”
6. ? “Yes”
– CONTINUED –
Center Information Display (CID)
229
3
Instruments and Controls