Subcold SUPER Series - Moving & Handling Your Appliance; Maintenance & Defrost

V1 7
• Preparaon for Maintenance
Disconnect the appliance from the power source and remove all contents.
• Interior Maintenance:
Clean the inside of the appliance with clean water and a non-hazardous cleaner, then wipe it dry
with a cloth. Avoid using any abrasives or solvents during cleaning.
• Door Gasket Maintenance:
Thoroughly clean the door gaskets to prevent potenal damage and increase operaonal life.
• Outer Maintenance:
Remove dust using a dry, clean cloth to maintain the external cleanliness of the appliance.
Defrosng Process:
• Excessive frost accumulaon can impact the appliance's refrigeraon eciency and escalate
energy consumpon. Defrosng becomes necessary when the frost reaches a thickness of 5
mm.
Manual defrosng involves the following steps:
• Remove all contents from the appliance.
• Take out the shelves.
• Unplug the power cable.
• Open the doors and wait for the natural thawing process.
• Wipe away the defrost water with a dry cloth.
Maintenance & Defrost
How to Safely Disconnect Your Fridge
Take note of the posion of each accessory when packing the appliance.
When repacking for transportaon, ensure everything is securely packed and accessories are
securely in place.
Avoid liing or pulling the door or handle during transport to prevent damage.
Allow a minimum of 2 hours standing me before reconnecng the appliance to power.
Keep the appliance lted at less than a 45-degree angle from the vercal direcon while moving to
prevent damage. Minimise exposure to strong vibraons during transportaon.
Moving & Handling Your Appliance