Section 6
NOISE CONTROL
33
2. ANNUAL AIR FILTER(S) AND AIR INLET SYSTEM INSPECTION
In addition tothe instructions in the Maintenance section of the Operator’s Manual, the airfilter(s) andentire
air inlet system should be inspected at least annually, to make sure all parts are secure ly mounted, that all
joints and connections are tight, that there are noother leaks in the system, andthat thefilter element(s) are
intact.
DO NOT
operate compressor with defective airinlet system. Remove and replace defective parts by
ordering with part numbers indicated in the Parts List.
Maintenance
Performed
By
Location
Date
Maintenance
Performed
By
Location
Date
DDDDDDDDDDDDDDDDD
3. ANNUAL ENGINE VIBRATION MOUNT INSPECTION
At least annually inspect engine vibration mounts for security of attachment and to make sure the resilient
partsareintact.
DONOT
operate compressor withdefective engine mounting system. Remove and replace
defective parts by ordering with part numbers indicated in Parts List.
Maintenance
Performed
By
Location
Date
Maintenance
Performed
By
Location
Date
DDDDDDDDDDDDDDDDD
To Next Page
Loading...
