Section 6
NOISE CONTROL
34
4. ANNUAL FRAME, CANOPY, AND PARTS INSPECTION
At least annually inspect frame, canopy and parts, for security of attachment. Make sure there are not any
missing or deformed members, including all hinged doors, covers and their fastening devices.
DO NOT
operate compressor with defective frame, canopy and parts. Remove and replace defective parts by order-
ing with part numbers indicated in Parts List.
Maintenance
Performed
By
Location
Date
Maintenance
Performed
By
Location
Date
DDDDDDDDDDDDDDDDD
5. ANNUAL ACOUSTICAL MATERIALS INSPECTION
Atleast annually inspect allacoustical materials, ifany ,forsecurity ofattachment. Make sure that there isnot
any material missing ordamaged (refer toParts List). Clean orreplace, ifnecessary.
DO NOT
operate com-
pressor with defective acoustical material. Remove and replace defective parts by ordering with part num-
bers indicated in the P arts List.
Maintenance
Performed
By
Location
Date
Maintenance
Performed
By
Location
Date
DDDDDDDDDDDDDDDDD
To Next Page
Loading...
