Sullair 2200 - Page 24

1800-3000 USER MANUAL SECTION 3
24
Table 3-1: Compressor Specifications
COMPRESSOR: STANDARD MODELS:
Type: Rotary Screw
Standard Speed Operating Pressure (II): 100 psi (7 bar) 125 psig (9 bar) 150 psig (10 bar) 175
psig (12 bar)
Bearing Type: Anti-friction
Ambient Temperature (Max.) (III): 104°(40°C)
Cooling: Pressurized Fluid
Compressor Fluid: Sullair Sullube
Separator/Sump Tank Capacity: 2.5 Gallons (9.5 liters)
Control: WS Controller
(II) Special compressors are available for operation at higher pressures.
(III) Special compressors are available for operation in higher ambient temperature.
MOTOR (IV): STANDARD MODELS:
Size: 25,30,40HP / 18,22,30KW
Type: C-Flanged, Open Drip proof, Epact Efficiency, Three Phase,
230/460 Hz, 380-515 (400) 50Hz
Maximum Ambient Temperature 104°(40°C)
Options Available: 200V and 575V 60 Hz, 220 50 Hz TEFC also available:
CE Approved
Starter: Full Voltage Magnetic, Wye-Delta
Options Available: VSD Optional, 460V, 575V, 400V 50 Hz
Speed—25, 30 HP: 1765 RPM (60 Hz) or 1475 RPM (50 Hz)
(IV) Multi-frequency and voltage motors are used. The compressors msust be used only with the specified
electrical frequency and voltage.
NOTE
For latest sound test data, consult Sullair
factory.