Sullair 300HH - 5.8 Part Replacement and Adjustment

59
375 Caterpillar Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.5 AIR INLET SYSTEM & EXHAUST SYSTEM (CONTINUED)
Key Description Part Number Note Quantity
1 elbow, 90m 5/16"tube x 1/8"npt 02250109-423 1
2 gasket, exht ca3054na 185q 02250110-425 1
3 tube,exhaust 375-425 cat 02250115-010 1
4 mufer, exhaust 300h-425 ft mtg 02250115-201 1
5 hose, air inlet eng (part 1) 02250140-336 1
6 tube, aluminum 3.5"od x 4"lg 16ga 02250140-363 1
7 clamp, t-bolt ss band 4.00"id 02250140-869 2
8 clamp, t-bolt ss band 5.00"id 02250140-870 2
9 clamp, t-bolt ss band 2.75"id 02250152-375 1
10 tube,exhst ext 375-600q t3 02250164-526 1
11 elbow,air inl compr 375-600 t3 02250164-530 1
12 lter, air inl 375-600 cfm 02250164-531 2
13 support, air trs 375 t3 02250164-534 1
14 hose,eng inl 375 t3 02250164-547 1
15 clamp, t-bolt ss band 5.50"id 042324 1
16 clamp. exhaust 3" 043713 2
17 cap, rain exhaust 3" 047208 1
18 nut,hex f pltd 5/16-18 825305-283 7
19 capscrew,hex gr5 3/8-16 x 1 829106-100 3
20 screw, hex ser washer 5/16-18 x 1 829705-100 3
21 screw, hex ser washer 5/16-18 x 1 1/4 829705-125 4
22 washer, spr lock reg pltd 3/8 837806-094 3
23 washer, pl-b reg pltd 3/8 838206-071 3
24 bulkhead, pipe 1/8" npt 841500-002 2
25 plug, pipe 1/8" 3000# stl plt 866900-005 1