81
375 Caterpillar Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.13 ELECTRICAL PARTS (CONTINUED)
Key Description Part Number Note Quantity
1 channel, extruded rubber “u” .25"w (ft) 02250086-448 2
2 washer, external serrated m10 02250092-169 2
3 cable, ground 4-gauge strap 02250101-258 1
4 battery, grp 31 hi cap taper post 02250114-276 1
5 lamp,license plate std 02250119-658 1
6 harness, 6-wire lites 375 02250119-673 1
7 bracket, license plate lamp 02250119-678 1
8 relay, 12-volt 40-amp 1no/1nc 02250141-092 2
9 relay, 12-volt 50-amp 1no/1nc 02250144-353 1
10 cable,battery red 54" 1ga 02250144-784 1
11 frame, assy 375-600 q t3 02250164-386 1
12 bail,lifting 375 t3 02250164-550 1
13 chnl, batt hold dwn 375-600t3 02250164-692 1
14 panel,batt cvr/baff 375-600t3 02250164-693 1
15 pnl frm rear 375-600 t3 02250164-958 (I) 1
16 grommet,rubber 1" hole 040162 1
17 nut,plastic square license plate 250006-076 4
18 cable,battery 50"lg black 250019-551 1
19 lamp,tail/turn/stop (shock mtg) 250028-415 2
20 clamp, hose 9/16"id 408300-001 1
21 nut,hex f pltd 1/4-20 825304-236 3
22 nut,hex f pltd 5/16-18 825305-283 4
23 nut,hex locking #10-24 825502-083 2
24 capscrew,hex 8.8 m10 x 16mm 828010-016 1
25 screw, hex ser washer 1/4-20 x 3/4 829704-075 3
26 screw, hex ser washer 5/16-18 x 3/4 829705-075 5
27 screw, mach-rd hd #10-24 x 3/4 831602-075 2
28 wrap,tie nylon tf4-8 843200-025 4
29 rod,threaded 5/16 x 10" lg 843505-100 2
(I) For color variations consult factory.