Section 6
ILLUSTRATIONS AND PARTS L IST
25
6.1 PROCEDURE FOR ORDERING PARTS
Parts should be ordered from the nearest Sullair Representative or the Representative from whom the com-
pressor was purchased. If for any reason parts cannot be obtained in this manner, contact the factory directly
at the address or phone numbers listed below.
When ordering parts always indicate the Serial Number of the machine. This can be obtained from the Bill of
Lading for the compressor or from the Serial Number Plate located on the instrument panel.
Standard fasteners (capscrews, nuts, washers, etc.) tubing a nd fittings, plus other standard hardware, have
not been included in the Parts List. Standar d Pipe is 150# malleable. These ar e items which can be obtained
quicker and more economically from local sources.
SULLAIR CORPORATION
Subsidiary of Sundstrand Corporation
3700 East Michigan B oulevard
Michigan City, Indiana 46360 U.S.A.
Telephone: 1-800-SULLAIR or
1-219-879-5451
Fax: (219) 874-1835 (Parts)
Fax: (219) 874-1805 (Service)
6.2 RECOMMENDED SPARE PARTS LIST - 200, 250 and 300HP/150, 187 and 225KW
DESCRIPTION KIT NUMB ER QUANTITY
Replacement Elemenet (Bearing Filter) 1085 2
Primary Separator Element Kit 11173 1
Secondary Separator Element Kit 13631 1
Air Filter Element 40402 1
Quad Ring, MPV 41619 2
”O”-Ring, MPV Cover Plate 826302-120 1
”O”-Ring, MPV Housing 826302-262 1
”O”-Ring, MPV Spring Cap 826302-236 1
”O”-Ring, Discharge Flange 826102-248 1
”O”-Ring, Discharge Cover 826502-267 1
Repair K it, Pressure Regulator 41742 1
Repair Kit, Sullicon 11579 1
Control Spring 41273 1
”O”-Ring, Discharge Valve 826502-267 1
Repair Kit for Flow Control Valve, PIN 13544 13671 1
Service Kit, Return Line Strainer 1118 1
O-Ring, Fill Cap 40102 1
Seal Kit, Main Filter 1100 2
Repair Kit, Blowdown Valve 13708 1
24KT Coolant Fluid, Gal 46850 5 Gal.
Replacement Element, Main Filter 44241 1
Repair Kit, Thermal Valve 1084 1
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
