Section 6
ILLUSTRATIONS AND PARTS L IST
49
6.10 ELECTRO-PNEUMA TIC CONTROL SYSTEM
key part
number description number quantity
1 bracket, mounting 25987 1
2 nut, whiz-lock 3/8”-18 * 4
3 screw, whiz-lock 3/8”-18 x 1” * 4
4 locknut, conduit 1/2” * 10
5 nipple, close 1/2” * 2
6 switch, pressure (Penn)** 40427 1
7 nipple, close 1/4” * 5
8 tee, tube 1/4”t x 1/4”p * 1
9 nipple, 1/4” x 3 1/2” * 1
10 tee, 1/4” * 3
11 bushing, reducing 1/4” x 1/8” * 1
12 valve, moisture bleed 41111 1
13 decal, water drain 46417 1
14 valve, pilot air** 40528 1
15 connector, t ube 1/ 4”t x 1/4”p * 3
16 valve, regulator (I) 41517 1
17 tube, copper 1/4” * 4
18 tee, tube 1/4”t x 1/4”p * 1
19 valve, check 49905 1
20 elbow, tube 1/4”t x 1/4”p * 2
21 bushing, reducing 1” x 3/ 4” * 1
22 nipple, close 3/4” * 1
23 elbow, 3/4” * 1
24 silencer, air 3/4” 40758 1
25 valve, blowdown (II) 47192 1
26 nipple, 1” x 5” * 1
(Continued on page 51)
* Standard hardware item, purchase locally.
** Due to the discontinuation of the Penn pressure switch, Sui lair Corporation has replaced it with the Barks-
dale pressure sw itch. Should maintenance be required on Penn pressure switch no. 40427, order Barks-
dale switch no. 241963 and bra cket 224518.
***For maintenance on pilot valve 40528, order repair kit 42246.
(I) For maintenance on regulator valve 41517, order repair kit 41742.
(II) For maintenance on blowdown valve 47192, order repair kit 13708.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
