EasyManua.ls Logo

Sullair 3709 - Page 83

Sullair 3709
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.4 COMPRESSOR, FRAME AND DRIVE, 3000 MODEL WITH 10 SERIES UNIT
(CONTINUED)
Key Description Part Number Note Quantity
1 frame, 37kw 02250151-176 1
2 spacer,air end shaft height 60hp 02250151-499 2
3 hub, coupling 1.50 bore falk 20r 02250152-622 1
4 hub, coupling 1.875 bore falk 20r 02250152-625 1
5 element,cplg falk 20r 02250152-670 1
6 cover,cplg element falk 20r 02250152-678 1
7 isolator, vibration motor 37kw 02250155-285 4
8 plate, motor seal 3000/3700/4500 02250156-393 2
9 adapter, compressor 3700x w/10series 02250160-067 1
10 plate, motor/compr adapt cover 03 225980 1
11 adapter, motor compr 10/40 - 231977 1
12 adapter, sae 5 dxx10 gi ma - 250009-542 1
13 nut,hex pltd 3/8-16 825206-337 8
14 nut,hex metric m12 x 1.75 825912-175 2
15 capscrew,hex 8.8 m12 x 30mm 828012-030 2
16 capscrew,hex 8.8 m12 x 35mm 828012-035 2
17 capscrew,hex 8.8 m12 x 65mm 828012-065 2
18 capscrew,hex gr5 3/8-16 x 1 1/4 829106-125 7
19 capscrew,hex gr5 3/8-16 x 1 3/4 829106-175 8
20 capscrew,hex gr5 5/8-11 x 1 1/2 829110-150 4
21 washer, spr lock reg pltd 3/8 837806-094 15
22 washer, spr lock reg pltd 5/8 837810-156 4
23 elbow, pipe 90 deg plt 1/2" 866215-020 1
24 nipple,pipe-xs plt 1/2 x cl 866408-000 1
25 washer, nord-lock pl m12 sp 883212-254 8
26 compressor (I) (II) 1
27 motor 40hp (I) 1
A1 From Air Inlet Filter
A2 Oil Return From Sightglass on Receiver Tank
A3 To Receiver Tank
A4 From Blowdown Valve
A5 Main Oil Connection
(I) This part may vary per machine design. Consult factory with machine serial number to determine the proper part number.
(II) Sullair offers an exchange program whereby a remanufactured compressor unit can be obtained from Sullair distributors
or the factory at a lower cost than it would cost for the owner to repair the unit. For information regarding the unit exchange
program, contact your nearest Sullair representative or the Sullair Corporation.
The shaft seal is not considered part of the compressor unit in regard to the two year warranty, but the normal Sullair parts
warranty does apply. For shaft seal repairs, order repair kit no. 02250155-594, and installation kit no. 001932-005.
PARTS LISTS
®SULLAIR®
3000-4500 Operator’s Manual and Parts List
77

Table of Contents

Other manuals for Sullair 3709

Related product manuals