Sullair 375 - Page 4

TABLE OF CONTENTS
SECTION 3—SPECIFICATIONS
53 3.1 SPECIFICATIONS—300HH, 375, 375H JOHN DEERE
55 3.2 SPECIFICATIONS—375HH, 425 AND 425H JOHN DEERE
56 3.3 LUBRICATION GUIDE— COMPRESSOR
56 3.4 APPLICATION GUIDE
57 3.5 LUBRICATION GUIDE— ENGINE
SECTION 4—GENERAL
59 4.1 GENERAL
59 4.2 PURPOSE OF CONTROLS
60 4.3 INITIAL STARTUP/SHUTDOWN PROCEDURE
60 4.4 RESTART PROCEDURE
SECTION 5—MAINTENANCE
61 5.1 GENERAL
61 5.2 ENGINE COOLANT REQUIREMENTS
62 5.3 MAINTENANCE AFTER INITIAL 50 HOURS OF OPERATION
62 5.4 MAINTENANCE EVERY 50 HOURS
62 5.5 MAINTENANCE EVERY 100 HOURS
62 5.6 MAINTENANCE EVERY 250 HOURS
63 5.7 MAINTENANCE EVERY 1500 HOURS
63 5.8 PART REPLACEMENT AND ADJUSTMENT PROCEDURES
70 5.9 TROUBLE SHOOTING
SECTION 6—NOISE CONTROL
73 6.1 NOISE EMISSIONS WARRANTY
73 6.2 TAMPERING WITH THE NOISE CONTROL SYSTEM IS PROHIBITED
74 6.3 NOISE EMISSIONS MAINTENANCE AND MAINTENANCE RECORD
LOG