Sullair 375H - Page 42

300HH, 375, 375H, 375HH, 425 AND 425H USER MANUAL R00 SECTION 2
40
SELECTING UNITS OF MEASUREMENT
1. Turn the switch to the ON position. Starting
at the single or four engine parameter dis-
play, press the Menu key.
2. The Main Menu will be displayed. Use the
arrow keys to scroll through the menu until
SELECTED UNITS is highlighted.
3. Once the SELECT UNITS menu item has
been highlighted, press the ENTER key to
access the ADJUST CONTRAST function.
4. There are three choices for units of measure-
ment: English, Metric kPa, or Metric bar.
English is for Imperial units with pressures
displayed in psi and temperatures in °F. Met-
ric kPa and Metric bar are for IS units with
pressures displayed in kPa and bar respec-
tively, and temperatures in °C.
Use the arrow keys to highlight the desired
units of measurement.
5. Press the ENTER key to select the high-
lighted units.
6. Press the Menu key to return to the Main
Menu.
Menu Ke
y
PV101 SU_0000531
1000 RPM
ENG RPM
57 PSI
1800 RPM
ENG RPM
57 F
COOL TEMP
12.4 VDC
BAT VOLT
OIL PRES
COOL TEMP
Figure 2-53
Selected Units
PV101 SU_0000532
ADJUST BACKLIGHT
SETUP 1-UP DISPLAY
SETUP 4-UP DISPLAY
SELECT UNITS
ADJUST CONTRAST
UTILITIES
Figure 2-54
Press Enter Ke
y
PV101 SU_0000533
ADJUST BACKLIGHT
SETUP 1-UP DISPLAY
SETUP 4-UP DISPLAY
SELECT UNITS
ADJUST CONTRAST
UTILITIES
Figure 2-55
PV101 SU_0000534
ENGLISH
METRIC KPA
METRIC BAR
Select Desired Units
Figure 2-56
PV101 SU_0000535
ENGLISH
METRIC KPA
METRIC BAR
Press Enter Key to Select
Figure 2-57
PV101 SU_0000536
ENGLISH
METRIC KPA
METRIC BAR
Return to Main Menu
Figure 2-58