Sullair 375H - Page 43

SECTION 2 300HH, 375, 375H, 375HH, 425 AND 425H USER MANUAL R00
41
7. Press the Menu key to return to the engine
parameter display.
S
ETUP 1-UP DISPLAY
1. Turn the switch to the ON position. Starting
at the single or four engine parameter dis-
play, press the Menu key.
2. Use the arrow keys to scroll through the
menu until SETUP 1-UP DISPLAY is high-
lighted.
3. Once the SETUP 1-UP DISPLAY menu item
has been highlighted, press the ENTER key
to access the SETUP 1-UP DISPLAY func-
tion.
4. Three options are available for modification
of Setup 1-Up Display.
a. Use Defaults—This option contains the fol-
lowing engine parameters for display: Engine
Hours, Engine Speed, Battery Voltage, %
Load, Coolant Temperature, and Oil Pres-
sure.
b. Custom Setup—This option contains a list
of engine parameters. Engine parameters
from this list can be selected to replace any
or all of the default parameters. This option
can be used to add parameters available for
scrolling in the Setup 1-Up Display.
c. Automatic Scan—Selecting the scan func-
tion will allow the Setup 1-Up Display to
scroll through the selected set of parameters
one at a time, momentarily pausing at each.
Press Menu Ke
y
PV101 SU_0000537
1800 RPM
ENG RPM
COOL TEMP
1000 RPM
ENG RPM
57 PSI
57 F
COOL TEMP
12.4 VDC
BAT VOLT
OIL PRES
Figure 2-59
Menu Ke
y
PV101 SU_0000538
1800 RPM
ENG RPM
COOL TEMP
1000 RPM
ENG RPM
57 PSI
57 F
COOL TEMP
12.4 VDC
BAT VOLT
OIL PRES
Figure 2-60
Setup 1-Up Display
PV101 SU_0000539
SETUP 1-UP DISPLAY
SETUP 4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
ADJUST CONTRAST
UTILITIES
Figure 2-61
Press Enter Ke
y
PV101 SU_0000540
SETUP 1-UP DISPLAY
SETUP 4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
ADJUST CONTRAST
UTILITIES
Figure 2-62
PV101 SU_0000541
USE DEFAULTS
CUSTOM SETUP
AUTOMATIC SCAN OFF
1-Up Display Options
Figure 2-63