SECTION 2 300HH, 375, 375H, 375HH, 425 AND 425H USER MANUAL R00
43
of parameters being displayed on the
SETUP 1-UP DISPLAY.
12. Use the arrow keys to scroll and highlight the
desired parameter that has not been
selected for display (parameter with a num-
ber to the right of it).
13. Press the ENTER key to select the parame-
ter for inclusion in the Single Engine Param-
eter Display.
14. Continue to scroll through and select addi-
tional parameters for the custom SETUP 1-
UP DISPLAY . Press the Menu key at any
time to return to the Custom Setup menu.
15. Automatic Scan—Selecting the scan func-
tion will allow the SETUP 1-UP DISPLAY to
scroll through the selected set of parameters
one at a time. Use the arrow keys to scroll to
the AUTOMATIC SCAN function.
16. Press the ENTER key to toggle the AUTO-
MATIC SCAN function on.
17. Press the ENTER key again to toggle the
AUTOMATIC SCAN function off.
18. Once the USE DEFAULTS, CUSTOM
SETUP and AUTOMATIC SCAN functions
Deselect Parameters
PV101 SU_0000548
ACCELERATOR PEDAL POSITION
PERCENT LOAD AT CURRENT RPM
ACTUAL ENGINE TORQUE
ENGINE SPEED
TOTAL ENGINE HOURS
TOTAL FUEL USED
ENGINE COOLANT TEMPERATURE
FUEL TEMPERATURE
ENGINE OIL PRESSURE
1
5
1
6
2
3
Select Desired Parameters
PV101 SU_0000549
This number now indicates the new
order of display for the parameters.
ACCELERATOR PEDAL POSITION
PERCENT LOAD AT CURRENT RPM
ACTUAL ENGINE TORQUE
ENGINE SPEED
TOTAL ENGINE HOURS
TOTAL FUEL USED
ENGINE COOLANT TEMPERATURE
FUEL TEMPERATURE
ENGINE OIL PRESSURE
1
5
1
6
2
3
Select Parameters for Display
ACCELERATOR PEDAL POSITION
PERCENT LOAD AT CURRENT RPM
ACTUAL ENGINE TORQUE
ENGINE SPEED
TOTAL ENGINE HOURS
TOTAL FUEL USED
ENGINE COOLANT TEMPERATURE
FUEL TEMPERATURE
ENGINE OIL PRESSURE
1
5
1
6
2
3
USE DEFAULTS
CUSTOM SETUP
AUTOMATIC SCAN OFF
utomatic Scan Of
USE DEFAULTS
CUSTOM SETUP
AUTOMATIC SCAN ON
utomatic Scan On
PV101 SU_0000688
USE DEFAULTS
CUSTOM SETUP
AUTOMATIC SCAN OFF
utomatic Scan Of