Sullair 375HH - Page 49

43
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
DESCRIPTION
Use the arrow keys to scroll and highlight the desired 12.
parameter that has not been selected for display
(parameter with a number to the right of it).
Press the ENTER key to select the parameter for 13.
inclusion in the Single Engine Parameter Display.
Continue to scroll through and select additional 14.
parameters for the custom SETUP 1-UP DISPLAY .
Press the Menu key at any time to return to the
Custom Setup menu.
Automatic Scan – Selecting the scan function will 15.
allow the SETUP 1-UP DISPLAY to scroll through the
selected set of parameters one at a time. Use the
arrow keys to scroll to the AUTOMATIC SCAN
function.
Press the ENTER key to toggle the AUTOMATIC 16.
SCAN function on.
Select Desired Parameters
ENGINE SPEED
PERCEN
T
LOAD
A
T
CURREN
T
RPM 2
ENGINE OI
L
PRESSURE
1
ENGINE COOLAN
T
TEMPER
A
TURE
Note that the numbers
now indicate the new
order of display for the
parameters
SU_0000549
Select Parameters For Display
ENGINE SPEED
PERCEN
T
LOAD
A
T
CURREN
T
RPM 2
ENGINE OI
L
PRESSURE
1
ENGINE COOLAN
T
TEMPER
A
TURE 3
SU_0000550
Automatic Scan Off
USE DE
F
AU
L
TS
CUS
T
OM SETU
P
AU
T
OM
A
TIC SCAN OFF
SU_0000551
Automatic Scan On
USE DE
F
AU
L
TS
CUS
T
OM SETU
P
AU
T
OM
A
TIC SCAN ON
SU_0000552
Figure 2-71
Figure 2-72
Figure 2-73
Figure 2-74