M
michealbaileySep 12, 2025
What to do if the Sullair 375HH Air Compressor shows a low fuel level?
- SSusan PenningtonSep 12, 2025
If the Sullair Air Compressor indicates a low fuel level, check the fuel level and fill the tank if it is empty.
To Next PageTo Next PageWhat to do if the Sullair 375HH Air Compressor shows a low fuel level?
If the Sullair Air Compressor indicates a low fuel level, check the fuel level and fill the tank if it is empty.
Why does my Sullair Air Compressor engine crank but not start?
There are several potential reasons why your Sullair Air Compressor engine cranks but doesn't start: * **Low voltage or battery issues:** Check and tighten battery cables and the ground wire. Recharge or replace the battery if needed. * **Blown fuse:** Inspect and replace any blown fuses in the wiring harness. * **Loose instrument panel connectors:** Check and reattach any loose connectors. Also, inspect wires for breaks or corrosion, cleaning or replacing them as necessary. * **Faulty SSAM module:** Consider replacing the SSAM module.
How to fix Sullair Air Compressor that does not crank?
If your Sullair Air Compressor doesn't crank, it might be due to low voltage or a disconnected battery. Check the battery cables and tighten them if they are loose. Also, check the ground wire for proper attachment to the frame and tighten if required. If the battery is the issue, recharge or replace it. Another potential cause is a blown fuse in the wiring harness, so remove and inspect the fuse, replacing it if necessary.
General| Brand | Sullair |
|---|---|
| Model | 375HH |
| Category | Air Compressor |
| Language | English |
General safety precautions for operating and maintaining Sullair compressors.
Safe towing practices, vehicle compatibility, and proper compressor parking procedures.
Lockout/Tagout procedures, California Proposition 65 warning, and symbols reference.
Instrument panel functions, diagnostic gauge usage, menus, and trouble codes.
Step-by-step instructions for initial startup, shutdown, and subsequent restarts.
Procedures for replacing parts, adjusting controls, bearing lubrication, and filter maintenance.
Symptoms, probable causes, and remedies for common compressor issues.
