Sullair 4500P - Section 3 - Specifications; Specifications for 4500 P, 5500 & 7500 Series Models

4500P-7500 USER MANUAL
23
SPECIFICATIONS
Section 3
3.1 TABLE OF SPECIFICATIONS - 4500P, 5500 & 7500 SERIES
MODELS
Model
(I)
HP
DIMENSIONS
Length Width Height Weight Weight
in mm in mm in mm
lbs kg
ODP TEFC ODP TEFC
4500P SERIES
4507P 60 78.7 1999 43.3 1100 68.9 1750 2755 3121 1249 1415
4509P 60 78.7 1999 43.3 1100 68.9 1750 2755 3121 1249 1415
4510P 60 78.7 1999 43.3 1100 68.9 1750 2755 3121 1249 1415
5500 SERIES
5507 75 78.7 1999 43.3 1100 68.9 1750 2826 3150 1281 1428
5509 75 78.7 1999 43.3 1100 68.9 1750 2826 3150 1281 1428
5510 75 78.7 1999 43.3 1100 68.9 1750 2826 3150 1281 1428
5512 75 78.7 1999 43.3 1100 68.9 1750 2826 3150 1281 1428
7500 SERIES
7509 100 78.7 1999 43.3 1100 68.9 1750 3213 3432 1457 1556
7510 100 78.7 1999 43.3 1100 68.9 1750 3213 3432 1457 1556
7509 100 78.7 1999 43.3 1100 68.9 1750 3213 3432 1457 1556
7512 100 78.7 1999 43.3 1100 68.9 1750 3213 3432 1457 1556
(I) Includes standard 24KT. Rated pressure designations appearing after model number are as follows:
07 - 100 psig (6.9 bar) 10 - 150 psig (10.3 bar)
09 - 125 psig (8.6 bar) 12 - 175 psig (12.0 bar)
Maximum unload pressure is the rated pressure plus 10 psig (0.7 bar).