SECTION 7 DE-18 USER MANUAL
83
CONTROL LINE FILTER MAINTENANCE
Refer to Figure 7-4. Control line filter (P/N 02250112-
032) maintenance normally requires replacement of
the filter element, float assembly and seals. Use
repair kit no. 02250112-031 (filter element and seal),
and repair kit no. 02250115-960 (float assembly and
seals).
*Replacement Element P/N 02250049-821
Figure 7-3: Oil Filter (P/N 02250049-820)
WARNING
DO NOT remove caps, plugs, and/or other
components when compressor is running
or pressurized.
Stop compressor and relieve all internal
pressure before doing so.
*Repair Kit P/N 02250112-031
Figure 7-4: Control Line Filter
(P/N 02250112-032)
To Next Page
Loading...
