Section 2
E900H User Manual 2: Description
02250203-986 R03
Subject to EAR, ECCN EAR99 and related export control restrictions. 17
Description
2.1 Introduction
Sullair portable air compressor models offer superior per-
formance and reliability while requiring only minimal
ma
intenance.
The compressor is equipped with a Sullair rot
ary screw
compressor unit. Compared to other compressors, the
Sullair is unique in mechanical reliability and compressor
durability. No inspection is required of the working parts
within the compressor unit.
As you continue reading this manual and come to learn
how the compres
sor operates and is cared for, you will
see how surprisingly easy it is to keep a Sullair compres-
sor in top operating condition.
Read Section 6: Maintenance to keep your compressor
in top operating condition. Should any problem or ques-
tion arise which cannot be answered in this text, contact
yo
ur nearest Sullair representative or the Sullair Service
Department.
2.2 Description of components
Refer to Figure 2-1. The components and assemblies of
the Sullair portable air compressor models are clearly
sh
own. The package includes a compressor, electric
motor, compressor inlet system, compressor cooling and
lubrication system, compressor discharge system,
capacity control system, instrument panel and electrical
system.
The electric motor is direct coupled to the compressor
unit
via a flexible coupling. A separate electric motor-
driven fan forces air through the cooler/aftercooler
assembly, thereby removing the heat of compression
from the cooling fluid.
2.3 Sullair compressor unit,
functional description
Sullair compressors feature the Sullair compressor unit, a
single-stage, positive displacement, flood lubricated-type
compressor. This unit provides continuous compression
to meet your needs.
Sullair compressors are factory-filled with
Sullair AWF
®
lubricant. For more information on fluid fill, refer to Sec-
tion 3.3: Application guide
on page 30.
Fluid is injected into the compressor unit hoses and
mixes directly w
ith the air as the rotors turn, compressing
the air. The fluid flow has three basic functions:
• As coolant, it controls the rise of air tempera-
tur
e normally associated with the heat of com-
pression.
• Seals the clearance paths between the rotors
and the stator and also between the rotors
themselves.
• Acts as a lubricating film between the rotors
allowing one rotor to directly drive the other,
which is an idler.
After the air/fluid mixture is discharged from the compres-
sor unit, the fluid is separated from the air. At this time,
th
e air flows through an aftercooler and separator then to
your service line while the fluid is being cooled in prepa-
ration for reinjection.
NOTE
With a Sullair compressor, there is no mainte-
nance or inspection of the internal parts of the
co
mpressor unit permitted in accordance with
the terms of the warranty.
To Next Page
Loading...
