Sullair ES-6 series - Page 41

Section 7
ILLUSTRATIONS AND PARTS LIST
37
7.7 COMPRESSOR SYSTEM
key part
number description number quantity
1 capscrew, ferry hd 1/4”---20 x 1 1/4” 828404---125 5
2 cover, outlet 250025---315 1
3 locknut, female M17 x 1 02250055---135 1
4 wavespring, female 02250055---485 1
5 bearing, taper 499080---203 2
6 locknut, male M25 x 1 02250055---135 1
7 wavespring, male 02250047---887 1
8 bearing, taper 499025---005 2
9 capscrew, ferry hd 5/ 16”---18 x 1” 828405---100 3
10 washer, metric elt sm 8 x 15 865308---150 1
11 capscrew, socket hd 1/4”---20 x 1/4” 828304---025 2
12 housing, stator 250029---910 1
13 capscrew, ferry hd 5/16”---18 x 2 1/4” 828405---225 2
14 washer, seal 499065---007 2
15 pin, dowel 3/8” x 1” 499045---032 4
16 rotor, female ”E” profile 02250055---489 1
17 rotor, male ”E” profile 02250055---490 1
18 capscrew, ferry hd 3/8”---16 x 3 3/4” 829106---375 2
19 plate, inlet 250030---828 1
20 hose, nylon 1/4” 842215---004
21 elbow, tube 90˚M 1/4” x 1/4” 250025---850 3
22 nipple, pipe 1/4”NPT x close 823204---000 1
23 valve, blowdown 1/4”NPT (I) 250025---655 1
24 tee, tube 1/4” 250025---835 1
25 screw, drive rod plated #8 x 3/8” 839608---060 2
26 plate, identification 250026---859 1
27 bearing, cylinder roll plain 499082---705 1
28 orifice, gear spray (mounting location) 250030---545 1
29 bearing, needle roller steel 250023---213 1
30 retainer, inlet bearing 250025---435 1
31 screw, machine flat head 1/4”---20 x 1/2” 831204---050 1
(Continued on page 39)
(I) For maintenance on blowdown va lve no. 250025---655, order repair kit no. 250031---772.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR