Sullair ES-6 series - Page 45

Section 7
ILLUSTRATIONS AND PARTS LIST
41
7.8 INLET FILTER AND INLET CONTROL
key part
number description number quantity
1 capscrew, hex GR5 1/4”---20 x 4” 829104---400 1
2filter,air(I) 02250110---591 1
3 stud, air filter 02250110---929 1
4 rod, intake control valve 02250044---810 1
5 spring, intake check 250034---619 1
6 retainer, intake control valve 02250044---809 1
7 gasket, inlet valve 250025---425 1
8 head, intake control valve 02250044---808 1
9 housing, intake control 250025---310 1
10 hose, nylon 1/4” 842215---004
11 elbow, 90˚M 1/8”npt x 1/4” tube 250025---849 1
12 piston, intake control valve (II) 02250044---811 1
13 seal, intake control piston (III) 02250044---671 1
14 washer, Belleville spring (II) 250031---269 2
15 capscrew, #10---32 x 1/2” Nylok 02250043---162 1
16 spring, inlet control 02250042---966 1
17 cap, air intake 250029---898 1
18 ring, ret aining internal 1 3/8” 836150---137 1
(I) Air filter n o. 02250110---591 is disposable. To maintenance filter, order replacement filter no.
02250110---591.
(II) For maintenance on inlet control, order piston no. 02250044---811 and washer no. 250031---269.
(III) For maintenance on air intake valve piston se al, order repair kit no. 02250045---287.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR