Sullair ES-8 - Page 18

Section 3
SPECIFICATIONS
12
MODEL
Flow Capacity
CFM at 39
_F(4_C) Evaporator
M
#/min. at 4_C Outlet Air Temperature
ES --- 8
Power Input (HP/KW)
Air Inlet/Outlet Connection (MPT)
DrainConnection(FPT)
Refrigerant Compressor HP/KW Rating
Maximum Heat of Rejection (BTU/HR /KCAL/HR)
Refrigerant/Charge (lbs/kg)
Standard Voltage (Optional)
(I) Flow Capacity rating is based on 118 psig (8.1 bar) air outlet pressure and 85
_F(30_C)
ambient temperature.
(II) Voltage Code: A --- 115/1/60 B --- 230/1/60
Figure 3---2 Integral Refrigerant---Type Dryer Specifications
(I)
(II)
Total Power Input --- Amps/Coulombs
114 (60 Hz)
1.1 / .82
1”
1/4
1/2 / .5
8308 / 2094
331 / 9.4
.81 / .37
A/B
9.0 / 32400
Cooling Air Flow (CFM/M
3
/MIN)
Height (in./mm) 42/1067
Width (in./mm) 36/914
Length (in./mm) 60/1524
Weight (ES---8 30HP/22KW) lbs/kgs 1658/752
95 (50 Hz)
3.23 (60 Hz)
2.69 (50 Hz)
FLUID FILTER
Type: Spin on, Sullair Proprietary
Micron: 23 Microns Abs.
Internal Bypass Valve Set at 25 psig (1.7 bar)
FLUID SEPARATOR ELEMENT
Type: PushInCartridge,SullairProprietary
Efficiency at Maximum C apacity: 5PPM Maximum