Sullair ES-8 - ES-8 Integrated Compressor;Dryer Specifications

Section 3
SPECIFICATIONS
11
3.1 SPECIFICATIONS -- ES--8 INTEGRATED COMPRESSOR/DRYER
50 Hz KW M
3
/MIN BAR LENGTH WIDTH HEIGHT WEIGHT dBA (I)
MODEL (MM) (MM) (MM) (KG) w/ Encls.
w/o Encls.
15L 11 1.62 7.5 1321 813 813 424 70/80
15HH 1 1 1.34 10 1321 813 813 424 70/80
15XH 11 1.02 13 1321 813 813 424 70/80
20L 15 2.33 7.5 1321 813 813 455 73/83
20HH 15 1.87 10 1321 813 813 455 73/83
20XH 15 1.54 13 1321 813 813 455 73/83
25L 18.5 2.85 7.5 1321 813 813 479 75/85
25HH 18.5 2.22 10 1321 813 813 479 75/85
25XH 18.5 1.78 13 1321 813 813 479 75/85
30L 22 3.34 7.5 1321 813 813 483 76/85
30HH 22 2.81 10 1321 813 813 483 76/85
30XH 22 2.18 13 1321 813 813 483 76/85
60 Hz HP ACFM PSIG LENGTH WIDTH HEIGHT WEIGHT dBA (I)
MODEL (IN.) (IN.) (IN.) (LBS.) w/ Encls.
w/o Encls.
15L 15 65 110 52 32 32 935 70/80
15HH 15 58 135 52 32 32 935 70/80
15XH 15 44 185 52 32 32 935 70/80
20HH 20 77 185 52 32 32 1002 73/83
20XH 20 60 185 52 32 32 1002 73/83
25HH 25 96 135 52 32 32 1055 77/85
25XH 25 77 185 52 32 32 1055 77/85
30HH 30 1 14 135 52 32 32 1065 78/85
30XH 30 95 185 52 32 32 1065 78/85
(I) Ratings for dBA at one meter.
Figure 3 --- 1 ES --- 8 Compressor
COMPRESSOR
Type: Single Stage Fluid Injected Screw Compressor
Minimum Full Load Operating Pressure: 60 psig (4.2 bar)
Maximum Full Load Operating Pressure: Nameplate Pressure (II)
Bearing Type: Anti---friction
Cooling: Pressurized Fluid
Lu b r ic a n t : Se e Lu b r ic a n t Sp e c if ic a t ion ( Se c t ion 3 . 2 )
Sump Capacity: 3 gallons (11.4 liters)
(II) Compressors are available for fullload pressures up to 175 psig (12.1 bar) and unload pressure 185 psig
(12.8 bar).
MOTOR 60Hz 50Hz
Type: ODP, C --- Flange ODP, C --- Flange
Synchronous Speed: 15 & 20 HP = 1800 RPM 11KW = 1500 RPM
25 & 30 HP = 3600 RPM 18.5KW = 3000 RPM
Voltage:
Standard All Sizes: 230/460 380/415
Optional All Sizes: 208
Optional All Sizes: 575
Optional Only:
Type:
Insulation Class: B --- (Min.) B --- (Min.)