Section 11
ILLUSTRATIONS AND PARTS LIST
61
11.8 AIR SYSTEM (DRYER)
key part
number description number quantity
1 u---bolt, clr mntg 250033---043 1
2 evaporator 250027---266 1
3 coupling, pipe 1” 801215---040 3
4 nipple, pipe 1” 822216---000 5
5 elbow, pipe 1” 801515---040 3
6 nipple, pipe 1” x 11 1/2” 822116---115 1
7 union, pipe 1” 802515---040 1
8 support 250032---920 1
9 nut, hex flange 3/8”---16 825306---347 6
10 screw, hex ser washer 3/8”---16 x 3/4” 829706---075 2
11 heat, exchanger 250027---254 1
12 strap, clr mntg 02250058---538 1
13 elbow, reducing pipe 1” x 3/4” 801604---030 1
14 nipple, pipe 3/4” x close 822212---000 1
15 separator, water (I) 02250052---689 2
16 elbow, tube 1” 810516---075 2
17 tube, a/a clr to evap 02250058---519 1
18 elbow, tube---F 1” x 1” 810416---100 1
19 support, cooler 02250058---537 1
20 cross, pipe 803315---010 1
21 elbow, tube 250024---704 2
22 tubing, nylon 250024---745 2.08 ft.
23 tubing, nylon 3/8” 250024---746 2.25 ft.
24 bulkhead, fitting 862016---100 1
25 bulkead, fitting 841500---006 1
26 connector, tube 250024---691 1
27 hose, air out 02250058---541 1
28 elbow, hose 1” 860216---100 1
29 filter, MPF (II) 250024---361 1
30 elbow, pipe 45˚ galv 803415---040 1
31 elbow, tube 1” 810516---100 1
32 tube 02250058---523 1
33 elbow, pipe 3/4” 801515---030 1
34 nipple, pipe 3/4” x 2” 822112---020 1
35 union, pipe 3/4” 802515---030 1
36 elbow, tube 250024---703 2
37 connector, tube 250024---690 1
(I) For maintenance on separator filter no. 02250052---689, order repair kit numbers as follows: auto drain no.
250022---965, sight glass no. 250024---295, o---ring no. 02250056---270.
(II) For ma intenance on MPF filter no. 250024---361, order repair kit no. 250024---427.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR/DRYER.