Sullair LS-32 - Section 1 SAFETY; 1.1 GENERAL SAFETY RESPONSIBILITIES; 1.2 PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS; 1.3 SAFE PRESSURE RELEASE PROCEDURES

TABLE OF CONTENTS
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
Section 1 Page
SAFETY 1 1.1 GENERAL
1 1.2 PERSONAL PROTECTIVE EQUIPMENT
1 1.3 PRESSURE RELEASE
2 1.4 FIRE AND EXPLOSION
2 1.5 MOVING PARTS
2 1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
3 1.7 TOXIC AND IRRITATING SUBSTANCES
3 1.8 ELECTRICAL SHOCK
3 1.9 LIFTING
4 1.10 ENTRAPMENT
Section 2
DESCRIPTION 5 2.1 INTRODUCTION
5 2.2 DESCRIPTION OF COMPONENTS
6 2.3 SULLAIR COMPRESSOR UNIT,
FUNCTIONAL DESCRIPTION
6 2.4 COMPRESSOR COOLING AND LUBRICATION SYSTEM,
FUNCTIONAL DESCRIPTION
7 2.5 COMPRESSOR DISCHARGE SYSTEM,
FUNCTIONAL DESCRIPTION
12 2.6 CONTROL SYSTEM, FUNCTIONAL
DESCRIPTION
20 2.7 AIR INLET SYSTEM, FUNCTIONAL
DESCRIPTION
Section 3
SPECIFICATIONS
21 3.1 SULLAIR SERIES LS-32 SPECIFICATIONS
21 3.2 LUBRICATION GUIDE- STANDARD COMPRESSORS
21 3.3 LUBRICATION GUIDE- 24KT COMPRESSORS
21 3.4 APPLICATION GUIDE
21 3.5 LUBRICATION CHANGE RECOMMENDATIONS
AND MAINTENANCE
22 Figure 3-2 Identification- LS-32 Air-cooled