Sullair Supervisor II Deluxe Controller User Manual

TABLE OF CONTENTS
1. SAFETY AND INTRODUCTION 1
1.1 SAFETY 1
1.2 SUPERVISOR CONTROLLER, SUPERVISOR II AND WS CONTROLLERS 1
1.3 SEQUENCED COMPRESSOR SYSTEMS 1
2. SEQUENCING WITH MULTIPLE CONTROLLERS 3
2.1 NORMAL OPERATION 3
2.2 COMPRESSOR SYSTEM 3
2.3 WIRING AND PIPING 4
2.4 MACHINE PREPARATION PRIOR TO SEQUENCING 4
2.5 SYSTEM OPERATION 5
2.6 SYSTEM SETUP AND TUNING 6
2.6.1 GENERAL SEQUENCING RULES 7
2.7 CHANGING SEQUENCE PARAMETERS 7
2.8 SEQUENCE PARAMETER NAMES 8
2.9 SYSTEM DISPLAY- SUPERVISOR CONTROLLER 10
2.10 SYSTEM DISPLAY- SUPERVISOR II DELUXE 10
2.11 SYSTEM DISPLAY- WS CONTROLLER 11
2.12 REMOVING A MACHINE FROM SEQUENCE FOR MAINTENANCE 11
2.13 CALIBRATION OF P2 PRESSURE TRANSDUCERS 12
2.13.1 SUPERVISOR P2 PRESSURE TRANSDUCER CALIBRATION 12
2.13.2 SUPERVISOR II DELUXE P2 PRESSURE TRANSDUCER CALIBRATION 13
2.13.3 WS CONTROLLER P2 PRESSURE TRANSDUCER CALIBRATION 13
2.14 FULL LOAD FEATURE 13
3. SEQUENCING WITH VARIABLE SPEED DRIVE COMPRESSORS 15
3.1 VARIABLE SPEED DRIVE APPLICATIONS 15
3.2 SETUP FOR FIXED SPEED MACHINES AND A VSD COMPRESSOR 15
3.3 SETUP FOR MULTIPLE VSD COMPRESSORS 16
4. OPERATION WITH REMOTE CONTROLLERS 17
4.1 NORMAL OPERATION 17
4.2 CONTROLS WIRING AND ADJUSTMENT – SUPERVISOR CONTROLLER 17
4.3 CONTROLS WIRING AND ADJUSTMENT – SUPERVISOR II DELUXE 18
4.4 CONTROLS WIRING AND ADJUSTMENT – WS CONTROLLER 19
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
Continued

Sullair Supervisor II Deluxe Controller Specifications

General

Brand	Sullair
Model	Supervisor II Deluxe Controller
Category	Controller
Language	English