Section 8
ILLUSTRATIONS AND PARTS LIST
141
8.31 ENCLOSURE- WATER-COOLED (CONTINUED)
key part
number description number quantity
33 handle, canopy 042262 1
34 clamp, wire 043194 6
35 spacer, fan support 227267 6
36 fan, 20” 245748 2
37 nut, hex pltd 1/4-20 825104-226 2
38 nut, hex pltd 7/16-14 825207-385 6
39 nut, hex f pltd 5/16-18 825305-283 13
40 nut, hex locking 5/16-18 825505-166 2
41 capscr, hex gr5 1/4-20 x 3/4 829104-075 2
42 capscr, hex gr5 5/16-18 x 3/4 829105-075 6
43 capscr, hex gr5 7/16-14 x 3 1/2 829107-350 6
44 screw, hex ser washer 5/16-18 x 3/4 829705-075 11
45 screw, hex ser washer 5/16-18 x 1 829705-100 38
46 screw, self-drill 1/4 x 1/2 834504-050 54
47 washer, spr lock reg pltd 7/16 837807-112 6
48 washer, pl-b reg pltd 5/16 838205-071 2
49 washer, pl-b reg pltd 7/16 838207-071 6
50 eyebolt, 5/16-18 x 1 1/8” pltd 839105-112 2
51 rivet, pop 1/8 x 1/2 843102-050 4
52 nut, retainer 5/16-18 .092 861405-092 15
53 motor, 0.75hp (II) -2
(II) This part may vary by machine. Consult factory with machine serial number.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
