Sullair TS-32S - Section 1 Safety; 1.2 Personal Protective Equipment; 1.3 Pressure Release Procedures; 1.4 Fire and Explosion Prevention

TABLE OF CONTENTS
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
Section 1 Page
SAFETY 1 1.1 GENERAL
1 1.2 PERSONAL PROTECTIVE EQUIPMENT
1 1.3 PRESSURE RELEASE
2 1.4 FIRE AND EXPLOSION
2 1.5 MOVING PARTS
2 1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
3 1.7 TOXIC AND IRRITATING SUBSTANCES
3 1.8 ELECTRICAL SHOCK
3 1.9 LIFTING
4 1.10 ENTRAPMENT
Section 2
DESCRIPTION 5 2.1 INTRODUCTION
5 2.2 DESCRIPTION OF COMPONENTS
6 2.3 SULLAIR COMPRESSOR UNIT, FUNCTIONAL DESCRIPTION
6 2.4 COMPRESSOR COOLING AND LUBRICATION SYSTEM,
FUNCTIONAL DESCRIPTION
8 2.5 COMPRESSOR DISCHARGE SYSTEM,
FUNCTIONAL DESCRIPTION
8 2.6 CONTROL SYSTEM, FUNCTIONAL DESCRIPTION
18 2.7 AIR INLET SYSTEM, FUNCTIONAL DESCRIPTION
Section 3
SPECIFICATIONS
19 3.1 SULLAIR SERIES TS-32S SPECIFICATIONS
19 3.2 LUBRICATION GUIDE- STANDARD COMPRESSORS
20 3.3 LUBRICATION GUIDE- 24KT COMPRESSORS
20 3.4 APPLICATION GUIDE
20 3.5 LUBRICATION CHANGE RECOMMENDATIONS
AND MAINTENANCE
22 Figure 3-2A Identification- TS-32S 400HP/ 298KW (Typical)
23 Figure 3-2B Identification- TS-32S 500-600HP/
373-447KW (Typical)
` 24 Figure 3-3A Piping and Instrumentation- Air-cooled
400HP/ 298KW (Typical)
26 Figure 3-3B Piping and Instrumentation- Air-cooled
500-600HP/ 373-447KW (Typical)