WSPC USER INTERFACE MANUAL SECTION 2
12
2.2 SYSTEM COMPATIBILITY
• Before beginning the installation process, your
computer should meet the following minimum
requirements.
• PC–compatible computer (Pentium® IV based, 1.0
Ghz processor recommended)
• Windows 2000 or Windows XP operating systems.
Windows 2000 may require special processing soft-
ware to properly operate the WSPC software.
• CD ROM drive
• 125 Mb of available hard disk space
• 256 Mb of available RAM memory
• Color monitor
• RS232 communications capability
2.3 INSTALLING THE WSPC
USER INTERFACE
SOFTWARE
Follow the instructions accompanying the WSPC
Installation package. The actual installation media
may be CD, internet, network, USB drive, or other
means, and the procedure will be specific to that
media. This installation will create a folder on your
disk drive, and install the necessary files into that
folder. Make a note of this location, as it may be
necessary for future updates. The default location for
all saved files will also be in that folder, but you may
browse to save into any other location in your PC as
desired. By default, the folder will be "WSPC" and will
be located in a "Sullair" folder. Recommended
locations are "C:\Sullair\WSPC" or
"D:\Sullair\WSPC”.
2.4 INSTALLING OR UPDATING
THE FRAMEWORK
The WSPC software requires the Microsoft .net®
Framework support program in order to run on the
PC. If Microsoft .net is already on the PC, you will be
able to run as soon as the installation is completed.
To install the framework, or update to the latest
version, use the following procedure for a free
download.
1. Connect the PC to the internet.
2. Go to the site: www.microsoft.com/down-
loads
3. Search for “.NET Framework”
4. Follow the instructions for downloading and
installation.
2.5 UNINSTALL THE WSPC
SOFTWARE
To uninstall the WSPC software:
1. Right-click any desktop shortcuts that were
created.
2. Click “Delete” to delete the shortcut.
3. Open “My Computer” and browse to the
folder created in Section 2.3.
4. Delete the folder and its contents.
NOTE
Contact your network administrator if you
are unable to perform the software
installation due to access limitations.
To Next Page
Loading...