Specifications
Installation Kit An installation kit, P/N 267303A, is included for connecting the cooling water
supply and return lines. The kit contains:
Item
Part No. Qty. Description
1
255919B2
1 Adapter Fitting
2
60760 40 Ft. Tube, Nylon, Natural Color, 1/2” O.D. x .062” Wl., Nycoil #61880
3
17568 2 Sets
Ferrule, Front, Brass, 1/2” O.D. Tube, Swagelok #B813-1
Ferrule, Front, Brass, 1/2” O.D. Tube, Swagelok #B814-1
4
12306 2 Nut, Female, Brass, 1 /2” O.D. Tube, Swagelok #B-812-1
5
22908 1 Bag, Polyethylene, Clear, 14” x 20” x 4 Mils Thick
Adapter Fittings (Optional Accessories): Valved Swagelok/Aeroquip fittings for charging,
venting or gas cleanup are available from SCAI. See the Parts section of this manual.
Remote On/Off Cable (Optional Accessory): A cable is available from SCAI to connect to the
Accessory receptacle on the front panel to operate the compressor from a remote location.
See the Parts section in this manual.
Supplier Name and Address
Sumitomo (SHI) Cryogenics of America, Inc.
1833 Vultee Street
Allentown, PA 18103-4783
U.S.A.
(610) 791 - 6700
To Next Page
Loading...
