PARTS
Ordering
The nameplate fastened to the front panel of the compressor housing identifies the compressor
as follows:
Model Number
Part Number
Serial Number
Date of Manufacture
Furnish this complete information when ordering parts. Also, order parts by part number and
name. Refer to the next section for Parts Identification and Numbers.
Compressor Parts Identification and Numbers
(See Figures 2, 3, 13, 14 and 15).
Pressure gauge, panel mount, 2" dial 50987
Circuit breaker, 20A, 250 V~, 2 pole 38888
O-ring (2), Aeroquip coupling 47102
Gasket face seal (2), 8M Aeroquip coupling 77002
Nylon washer (2), Aeroquip coupling 72628
Lock washer (2), Aeroquip coupling 46401
Lock nut (2), Aeroquip coupling 46101
Dust cap (2), Aeroquip coupling 44642
Caster (4), swivel 49137
Front ferrule (2), water fitting 12307
Rear ferrule (2), water fitting 12308
Nut (2), water fitting 12306
* Part is not shown.