55
BASE INSTALLATION WITH LATCH
(LOWER ANCHORS) (CONT.)
9
10
11
12
Insert the carrier into the base until
you hear a click. Re-check the level
indicator.
ALWAYS lift up on the carrier to be
sure that it is securely in the base.
Recommended:
Squeeze both handle
adjustment buttons and
lower handle to
Position 1.
To remove carrier from
the base, raise the handle
to position 2, squeeze the
handle release at the
back of the carrier
and lift up.
click!click!
1
9
10
1211
To Next Page
Loading...
