Chapter 2 ILOM Platform Features for the Sun Fire X4170, X4270, and X4275 Servers 15
2. In the ILOM web interface, select Configuration → Serial Port.
The Serial Port Settings page appears.
3. To select a serial port owner, click the Owner drop-down list and select the
desired serial port owner.
The drop-down list enables you to select either Service Processor or
Host Server.
By default, Service Processor is selected.
4. Click Save for your change to take effect.
▼ Switch Serial Port Output Using the CLI
1. Log in to the ILOM CLI.
To Next Page
Loading...
Need help?
General
