Do you have a question about the Sun Microsystems Fire V240 and is the answer not in the manual?
Provides an overview of Sun Fire V210 and V240 servers, including features, differences, and configurations.
Details front panel components such as status LEDs, switches, hard drives, DVD-ROM, and system configuration card.
Lists components accessible via the front bezel and provides electrostatic discharge safety guidelines.
Provides instructions for powering the servers on and off using the On/Standby switch.
Covers the removal and replacement of hard drives, including hot-plugging and Solaris integration.
Details procedures for removing and replacing power supply units, especially for dual-redundant PSUs.
Details Power-On Self-Test diagnostics, including how to start and control them.
Explains how to start and control OpenBoot Diagnostics tests.
| Form Factor | 2U Rackmount |
|---|---|
| Processor | UltraSPARC IIIi |
| Operating System | Solaris |
| Processor Speed | 1.5 GHz |
| Cache | 1 MB L2 cache per processor |
| Memory | Up to 8 GB |
| Memory Type | DDR SDRAM |
| Hard Drives | 73 GB or 146 GB |
| Network | 2 x 10/100/1000 Mbps Ethernet |











