5-4 Sun Fire V210 and V240 Servers Administration Guide • December 2005
5.1.3 To Find Out Whether SunVTS Is Installed
● Type the following:
■ If SunVTS software is loaded, information about the package is displayed.
■ If SunVTS software is not loaded, you see the following error message:
5.1.4 Installing SunVTS
By default, SunVTS is not installed on the Sun Fire V210 and V240 servers. However,
it is available on the software supplement CD supplied with the Solaris OS. For
information about downloading it from this CD, refer to the Sun Hardware Platform
Guide for the release of the Solaris OS you are using.
To find out more about using SunVTS, refer to the SunVTS documentation that
corresponds to the Solaris OS release that you are running.
env6test Tests temperature sensors, power supply status, fan speeds, and
keyswitch position. Test LEDs by toggling them on and off.
ssptest Tests functionality of ALOM hardware. Test onboard Ethernet, flash
ram, SEEPROM, TOD, I
2
C connections from ALOM to the host
system, and serial ports.
i2c2test Verifies all available I
2
C devices and the system bus connections.
Performs data checking for SCC and FRU SEEPROM devices.
# pkginfo -l SUNWvts
ERROR: information for “SUNWvts” was not found
TABLE 5-1 SunVTS Tests
SunVTS Test Description
To Next Page
Loading...
Need help?
General
