Sun Microsystems Sun Fire V890 Product Notes

Sun Fire V890 Server Product Notes 15
Sun Management Center Software Support
Sun Management Center software, Version 3.5 Product Update 1, supports the Sun
Fire V890 server. For more information about the Sun Management Center software,
refer to the Sun Management Center 3.5 Supplement for VSP High-End Entry Servers
(Workgroup Servers).
Sun StorEdge Traffic Manager Software
Sun StorEdge™ Traffic Manager software automates multipath I/O failover, fail-
back, and SAN-wide load balancing on multiple platforms. It also allows you to
perform dynamic database configuration. This software can help provide improved
I/O performance, increased availability, and time-saving manageability on your
mission-critical SAN.
To learn more about Sun StorEdge Traffic Manager software, to take an interactive
tour of its features, and to price and purchase the product for your installation,
go to:
http://www.sun.com/storage/software/storage_mgmt/traffic_manager
/index.xml
Documentation Notes
OpenBoot Firmware Documentation
The Sun Fire V890 server uses OpenBoot PROM Version 4.15 system firmware.
Instructions for using the firmware are provided in the OpenBoot 4.x Command
Reference Manual, which is available at the following web site under Solaris on Sun
Hardware:
http://docs.sun.com
Sun Management Center 3.5 Support
The Sun Management Center 3.5 Supplement for VSP High-End Entry Servers
(Workgroup Servers) does not specify Sun Fire V890 support. However, this version of
the software does support the Sun Fire V890 server.

Sun Microsystems Sun Fire V890 Specifications

General

Brand	Sun Microsystems
Model	Sun Fire V890
Category	Server
Language	English