Sun Fire V890 Server Product Notes 13
Updated Rackmounting Information for the
Sun Fire V890 Server
Currently, the only supported Sun racks for the Sun Fire V890 server are the Sun
StorEdge Expansion Cabinet (Sun part number SG-XARY030A), the Sun Fire Cabinet
(Sun part number SF-XCAB), and the Sun Rack 900 (Sun part number SR9-KL038A-
IP).
To rackmount a Sun Fire V890 server in the Sun Rack 900, use the Sun X9638A
rackmounting kit.
To rackmount a Sun Fire V890 server in the Sun StorEdge Expansion Cabinet and the
Sun Fire Cabinet, use the Sun X9628A rackmounting kit.
An optional door (Sun part number X9818A) is available for the Sun StorEdge
Expansion Cabinet. This door is required for EMI purposes if you are rackmounting
two Sun Fire V890 servers in this rack.
Note – You can install only one Sun Fire V890 server into the Sun Fire Expansion
Cabinet.
Sun Fire V890 Server Rackmounting Safety
Information
Caution – As stated in the Sun Fire V890 Server Rackmounting Guide, do not attempt
to lift the server until you remove all CPU/Memory boards, all power supplies, all
CPU fan trays, and all I/O fan trays. Once these components are removed, four
persons are required to lift the server.
The four lifting handles included in the rackmounting kit are not designed to
support the weight of a fully populated server.
To Next Page
Loading...
