iv Sun Fire X4450 Server Installation Guide • July 2008
Disassembling Bolt-On Slide-Rails 11
Disassembling Tool-less Slide-Rails 12
Installing the Mounting-Brackets Onto the Server 13
Attaching the Slide-Rail Assemblies to the Rack 14
Attaching Bolt-On Slide-Rail Assemblies 14
Attaching Tool-less Slide-Rail Assemblies 17
Installing the Server Into the Slide-Rail Assemblies 17
Installing the Cable Management Arm 20
Verifying Operation of the Slide-rails and CMA 26
3. Setting Up the Sun Fire X4450 Server 27
Connecting the Cables 27
Connector Locations 27
Cabling the Server 29
Service Processor Overview 30
Embedded LOM Service Processor Software Overview 30
Integrated LOM Service Processor Software Overview 32
Connecting to the LOM Service Processor for the First Time 33
Initial LOM Setup Overview 33
About Service Processor Interfaces 33
About LOM IP Addresses 34
Determining the LOM Service Processor IP Address 34
Method 1: Access the BIOS 34
Method 2: Connect to the SP Using a Serial Connection 35
Modifying the Service Processor IP Address 37
Method 1: Using the BIOS 37
Method 2: Using the Serial Connection 38
Example 1: Set to Static IP address 38
Example 2: Set to DHCP IP address 39
To Next Page
