Preset 95 + call will appear the following menu:
Description of each option from the menu:
Model: 502S-AHD, 604-AHD, 801-AHD, 805-AHD, 301-3X,301-AHD3X
801-36X, 805-36X, 507-AHD, 604-22X, 604-36X,405-22X,405-AHD20X.
When you open the OSD menu with preset 95+CALL, use the up and
down keys to move the cursor, left key to go back to the previous menu,
right key to select and conrm.
1.SOFT ADDR
Set up the soft address of the camera (refer to Address Setting chapter
for more details).
6.Camera OSD Menu
SOFT ADDR
MAIN MENU PAGE 1
PARK ACT
PARK TIME
FRAME SPEED
DWELL TIME
LED MODE
LED ON
LED OFF
CAMERA
1
15
16
185
6
201
NONE
AUTO
MAIN MENU PAGE 2
RESET
EXIT
2.PARK ACT
This option is also called the watch function or the defend function of a
PTZ camera. The dome will automatically execute a corresponding preset
action after a settled idle time (15 seconds is default) if no additional
commands were received from users. Control the up and down keys to
select the option, and use the left and right direction arrow to select idle
actions.
- 11 -