How to receive sufficient channels through the ATSC/NTSC Tuner on SunBriteTV LCD TV?
To receive sufficient channels through the ATSC/NTSC Tuner on your SunBriteTV LCD TV, change the direction of your antenna and rescan the channels. If you have cable, call the cable provider and ask to have your signal strength checked.
Why does my SunBriteTV LCD TV turn off automatically?
Your SunBriteTV LCD TV may be turning off automatically due to a power-saving mode. This mode activates if there is no signal provided to the TV for 15 minutes. Alternatively, try unplugging the TV for at least one hour to perform a hard reset.
What to do if remote control does not work on SunBriteTV LCD TV?
If the remote control for your SunBriteTV LCD TV is not working, turn off the TV and unplug it from the socket. Remove the batteries from the remote for 30 minutes. Press the remote buttons and the power button randomly for two full seconds, then reinstall the batteries.
What to do if my SunBriteTV SB-5560HD LCD TV has picture only, but no audio?
If your SunBriteTV LCD TV displays a picture but has no audio, ensure the audio cable is connected properly. Also, readjust the volume using the remote control. The TV tuner signal must not be lower than 65 percent.
What to do if my SunBriteTV LCD TV has audio only, but no picture?
If your SunBriteTV LCD TV has audio but no picture, ensure that both the audio and video cables are connected correctly. Also, make sure the TV tuner signal is not lower than 65 percent. If the issue persists, unplug the TV for at least one hour to perform a hard reset.
What to do if SunBriteTV LCD TV picture is distorted?
If the picture on your SunBriteTV LCD TV is distorted or has an abnormal sound, and the TV is close to the wall, try moving the TV to another location to see if the problem still occurs.
Why does my SunBriteTV LCD TV turn on slowly?
Your SunBriteTV LCD TV is a High Definition liquid crystal display panel TV, and it requires a few more seconds than normal TVs to power up and show the picture.
Why is there noise on the screen of my SunBriteTV SB-5560HD LCD TV?
The noise or trash pixels you see on your SunBriteTV LCD TV screen can be caused by up-converting.
How to fix no color on SunBriteTV SB-5560HD LCD TV?
To restore color on your SunBriteTV LCD TV, adjust your picture setup and ensure that the saturation and the RGB settings are not turned all the way down.
How to get 1920 x 1080 from PC VGA on SunBriteTV LCD TV?
If you cannot get 1920 x 1080 resolution from your PC VGA connection on your SunBriteTV LCD TV, check your video card’s maximum resolution and use that setting.
Details the process of checking included items after unboxing the television.
Instructions for accessing and connecting devices via the internal connection panel.
Steps for installing the IR emitter for remote control functionality.
Procedure for connecting the television to a power source.
Overview of the TV's back panel and its controls.
Explanation of how to navigate and use the TV's On-Screen Display menus.
Details on adjusting picture settings like mode, contrast, brightness, and color.
Guide to configuring audio settings, including bass, treble, balance, and sound modes.
Overview of system settings such as parental controls, time, and closed caption.
Configuration options for parental controls, including password and rating restrictions.
Specific parental control settings for Canadian region, including language options.
Settings for enabling and customizing closed caption display.
Instructions for managing TV channels, including auto scan and favorites.
Proper methods for cleaning the television's LCD screen to prevent damage.
Guidelines for cleaning the TV cabinet and removing dirt or salt deposits.
Advice on protecting the TV from extreme cold temperatures below -24°F.
Information on the manufacturer's policy regarding defective pixels on the LCD screen.
General| Brand | SunBriteTV |
|---|---|
| Model | SB-5560HD |
| Category | LCD TV |
| Language | English |
To Next Page
