SunComm SC-1695i - Factory Reset; Restart; 5 Faq

User Manual
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
52
When using web or telnet Configuration, please enter default user name and password. User can
modify the login name and password.
4.14.9 Factory Reset
Figure 4-14-9 Factory Reset
Be careful do this operation, after restore factory setting, all the parameters will be changed to the
factory default.
4.14.10 Restart
Figure 4-14-10 Restart
5. FAQ
5.1 Device have been connected to network physically, but can not access the gateway