User Manual
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
49
SysLog Paremeter Syslog is a standard for network device data logging. It allows
separation of the software that generates messages from the system
that stores them and the software that reports and analyzes them. It
also provides devices which would otherwise be unable to
communicate a means to notify administrators of problems or
performance. There are 5 grades of syslog, Including NONE,
DEBUG, NOTICE, WARNING and ERROR.
Send CDR Telephone exchanges generate so called Call Detail Records (CDRs)
which contain detailed information about calls originating from,
terminating at or passing through the exchange. Not surprisingly
CDRs are used for billing.
Set to Yes gateway will sne the CDR to the syslog server.
NTP Parameter The Network Time Protocol (NTP) is a protocol and software
implementation for synchronizing the clocks of computer systems
over packet-switched, variable-latency data networks.
User need to fill the NTP Server Address and select Time Zone
4.14.3 Data Backup
Figure 4-14-3 Data backup
Click 'Backup' for download configuration file to your computer.
4.14.4 Data Restore
Figure 4-14-4 Data restore
To Next Page
Loading...
