How to fix poor jet action in Sundance Spas Hot Tub?
To improve poor jet action in your Sundance Spas hot tub: * Ensure pump #1 is on by pressing the JETS 1 button. * Rotate the air control clockwise to the “on” position. * Check for a dirty filter and clean it if needed. * Make sure all jets are fully open.
Outlines FCC compliance and measures for potential interference with radio communications.
Factors to consider when choosing an ideal outdoor location for your spa.
Configures the primary filtration cycle, including start time and duration.
Detailed instructions for cleaning and replacing the spa's MicroClean filter cartridges.
How the spa enters "summer logic" to prevent overheating in high ambient temperatures.
Indicates a cool condition where circulation and heater activate to reach set temperature.
Alerts to a potential freeze condition, activating pumps and heater to prevent damage.
Signals a malfunctioning or shorted temperature sensor, disabling the heater.
Steps to correct FL--1 and FL--2 flow errors, including checking water level and filter.
Troubleshooting steps for when no spa components are functioning.
Diagnosing issues when the pump is not operating or water is not flowing.
General| Brand | Sundance Spas |
|---|---|
| Model | Dover |
| Category | Hot Tub |
| Language | English |
To Next Page