Instruction of SR81 Split Pressurized Solar Hot Water System
Page 15 of 48
2. Please remark the power of electrical heater and the voltage used.
Select desired sensor of heated
tank (S3 for T3, S2 for T2)
Switch-on time and temperature
of the first heating section
Switch-off time and temperature
of the first heating section
Switch-on time and temperature
of the second heating section
Switch-off time and temperature
of the second heating section
Switch-on time and temperature
of the third heating section
Switch-off time and temperature
of the
third heating section
Function setting:
►Press “SET” button to access main menu, and select
THET timing heating menu.
►Press “SET” button to set parameter, firstly to select the
desired sensor for the heated tank, “THTS S3” displays on
the screen.
To Next Page
Loading...
Need help?
General
