Instruction of SR81 Split Pressurized Solar Hot Water System
Page 30 of 48
Switch-on temperature
difference of cooling function
Switch-off temperature
difference of cooling function
Heat transferring by external
radiator ( only in case there is
available output)
Temperature set point for heat
transferring ( hysteresis 5
o
C)
OTPM
ON=pump
Logic
OTPM
OFF=Valve
logic
Pump control logic and valve
control logic
Function setting:
OSTC (Tank cooling) setup
►Select “OSTC” function submenu,”OSTC” displays on
the screen
►Press “SET”, “OSTC OFF” displays on the screen