EasyManua.ls Logo

SunFX Pro - Application Trouble Shooting

SunFX Pro
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
“My spray pattern is not ne, looks spotty or ‘beads’ on clients”
Too much solution applied – reduce number on applicator wheel
Applicator moving too slow – alter spray technique
Foreign matter caught in nozzle – clean with correct procedure
Not enough air pressure coming through applicator—check hose connection
“My Applicator is spraying too light on clients”
Not enough solution applied – increase number on applicator wheel
Applicator moving too fast – alter spray technique
Foreign matter caught in nozzle – clean with correct procedure
APPLICATION TROUBLE SHOOTING
“The solution is beading up on my client when I am spraying them”
Too much solution being applied
Client has moisturiser or perfume on
Client has been sweating
Buff area lightly with a clean towel and respray lightly, blending edges in
“The palms of my clients hands have tan on them”
Therapist has sprayed their palms by mistake
Client has touched part of their spray tanned skin
Exfoliate the area using a face washer and soap or an exfoliate
“The client has orange overtones”
Too much solution may have been applied
Your Client may already have tanning solution on
Skin type has abnormal absorption of DHA
Client will need to remove all tan before being resprayed. To help with this process we
recommend soaking in a hot bath, exfoliating and even using tea tree oil based products
“The client has patchy areas”
Client had oils or moisturisers on at time of spraying
Clients clothes were rubbing or chafng excessively after spray tan had been applied
Client did not exfoliate enough or at all
Client has very dry skin areas
Client will need to remove all tan before being resprayed. To help with this process we
recommend soaking in a hot bath, exfoliating and using tea tree oil based products
“The clients tan was not as dark as it was the time before”
Solution has expired or has been left in the heat
Different solution used previously
Washed off before the tan had time to develop
Sprayed on too light
Ensure the solution has not expired and is kept in a cool dry place. Make sure the client had waited
the recommended time before having a shower. The client may require to be resprayed
25

Table of Contents