SunFX Pro - How to Use Your SunFX Pro Professional Applicator

STEP 1
UNFASTEN SOLUTION CUP
To unfasten solution cup simply rotate cup Clockwise.
STEP 2
FILLING SOLUTION CUP
Fill solution cup approximately ¾ full with SunFX Pro
Premium Tanning Solution. Wipe any excess solution
from (1) inside of the applicator body and (2) outside of
the solution cup.
CAUTION:
Filling the cup beyond this recommended level may cause
spillage when returning the cup to the spray applicator.
Excess solution may also be spilled or splashed onto the
inside of the applicator causing it to drip down during
spraying.
STEP 3
FASTEN SOLUTION CUP BACK ON TO APPLICATOR
To fasten applicator cup back on to applicator simply rotate
Anti-clockwise until reasonably tight.
CAUTION:
Avoid over tightening by applying excessive force.
STEP 4
ATTACHING HOSE TO APPLICATOR
Line up the locating groove in the hose with the tab inside
the applicator handle. Turn Anti-clockwise and GENTLY
lock end of the hose securely into the handle of the
applicator.
CAUTION:
Excessive force may result in the bending or breaking of
these parts.
HOW TO USE YOUR SUNFX PRO PROFESSIONAL
APPLICATOR
3